Nordic 3 - Schematics, Bill of Materials, PCB Layout Files, Production Files; Power Consumption Performance

6 Hardware description: Smart Remote 3 nRF52 product example
Doc. ID 4374_139 v1.1
Page 54
SB1
VDD
Buzzer
R10
1M0
GND
GND
Q1
FDV303N
+
Bz1
CSS-0575A-SMT
D2
BAS16
Figure 44: Buzzer schematic
6.3.13 Schematics, bill of materials, PCB layout files, production files
Hardware files for the Smart Remote 3 nRF52 product example are available in a zip package.
The hardware files for the Smart Remote 3 nRF52 product example are located in the following folder in the
hardware files zip package:
\nRFready Smart Remote 3 for nRF52 series x_x_x\nRF6937 - nRF52 Product
Example x_x_x
In this folder you can find bill of materials, schematics and PCB layout files in PDF format, Altium Designer files,
and production files (assembly drawings, gerber files, drill files, pick-and-place files).
6.4 Power consumption performance
These Smart Remote 3 performance indications for the product example are reached by specific hardware and
firmware revisions.
Hardware and firmware revisions:
• Hardware: PCA20018 Rev 1.1.0
• Firmware: SR3-nRF52 v1.1, using the default settings
• SoC nRF52832 QFAA
Firmware settings can be modified to obtain a different set of performances.
Measurement conditions:
• Average current, measured at battery connectors
• DC/DC enabled, if not mentionned otherwise
Table 7: Performances
Electrical specifications nRF52 product example
PCA20018 Rev 1.1.0/Typical
value
Comments/conditions
No activity