Nordic 3 - Page 58

7 Firmware update of Smart Remote 3
Doc. ID 4374_139 v1.1
Page 58

2. Connect your board to the host as instructed in Turn on and pair with Windows on page 11 and Turn on
and pair with Ubuntu on page 13.
3. In the Device Manager pane, select the board to program.
4. Select the Segger ID matching the nRF52 DK connected to the product example.
5. Select the Program Application tab.
6. Click Browse to locate the application HEX file that you want to program.
It can be found in: <installation_path>\nRFready Smart Remote 3 nRF52
v1.1\Precompiled Firmware\.
The default installation path is: C:\Nordic Semiconductor\.
7. Click Program.