To Next PageTo Next PageWhat to do if NordicTrack A2550 NTL09107.0 Treadmill power turns off during use?
If your NordicTrack Treadmill turns off during use, try the following: * Check the reset/off circuit breaker. If it has tripped, wait five minutes, and then press the switch back in. * Ensure the power cord is securely plugged in. If it is, unplug it, wait five minutes, and then plug it back in. * Remove and reinsert the key from the console.
How to fix NordicTrack A2550 NTL09107.0 Treadmill if power does not turn on?
If your NordicTrack Treadmill power does not turn on: * Ensure the power cord is plugged into a surge suppressor that meets the specifications on page 12, and that the surge suppressor is plugged into a properly grounded outlet. Note: The treadmill is not compatible with GFCI-equipped outlets. * Make sure the key is inserted into the console after plugging in the power cord. * Check the reset/off circuit breaker located on the treadmill frame near the power cord. If the switch protrudes, the circuit breaker has tripped. Wait five minutes, and then press the switch back in to reset it.
What to do if the console displays remain lit on my NordicTrack Treadmill?
If the console displays on your NordicTrack Treadmill remain lit after removing the key, the demo mode is likely turned on. To turn it off, hold down the Stop button for a few seconds. If the displays are still lit, see THE INFORMATION MODE on page 22 to turn off the demo mode.
General| Incline Range | 0-12% |
|---|---|
| Speed Range | 0-12 MPH |
| Weight Capacity | 300 lbs |
| Folding | Yes |
| Bluetooth | No |
| Cooling Fan | Yes |
Read all precautions and instructions before using the treadmill; follow numbered safety guidelines.
Covers unattended use, object insertion, part tightening, and intended use for in-home settings.
Important information on pre-lubricated belt, surge protector requirements, and proper grounding for safe operation.
Step-by-step guide to turning on the treadmill, using the key, and initiating the manual workout mode.
Steps to safely fold the treadmill into storage position, including incline adjustment and latching.
Solutions for power issues, tripped circuit breakers, and ensuring the key is properly inserted.
Procedure to recalibrate the incline system if it is not functioning correctly.
Solutions for a walking belt that slows down, including checking surge suppressor and belt tension.
Steps to correct an off-center walking belt or a belt that slips, involving roller bolt adjustments.
