Key No. Qty. Description Key No. Qty. Description
101 4 M8 Split Washer 120 2 Upright Brass Bushing
102 12 M6 Split Washer 121 1 Left Lift Arm
103 8 M8.5 x 16mm x 1.5mm Washer 122 1 Right Lift Arm
104 4 M8 x 20mm x 2mm Washer 123 2 Lift Bushing
105 4 M8 x 16mm Button Screw 124 1 Transformer
106 10 M8 x 15mm Button Screw 125 1 Control Box Cover
107 8 M8 x 20mm Button Screw 126 1 Motor Clevis Pin
108 4 M6 x 62mm Screw 127 1 Bracket Pin
109 4 M6 x 35mm Screw 128 1 Lift Reed Switch
110 6 M8 x 25mm Button Screw 129 1 Switch Cover
111 4 M10 x 20mm Button Screw 130 1 Power Socket
112 8 M8 x 25mm Shoulder Screw 131 2 Motor Spacer
113 2 M8 x 30mm Button Screw 132 4 M4 x 10mm Screw
114 5 1/4" x 19mm Button Screw * User's Manual
115 3 M4 x 12mm Screw * Hex Key
116 56 M4 x 16mm Screw * Grease Packet
117 8 M4 x 16mm Cupped Screw * Power Cord
118 4 M6 Locknut * Lift Motor Power Wire
119 4 Bearing Assembly * Lift Motor Sensor Wire
Note: Specifications are subject to change without notice. For information about ordering replacement parts, see
the back cover of this manual. *These parts are not illustrated.
25
To Next Page
Loading...
