NordicTrack C1250 - Page 12

12
14. Firmly tighten the four the 3/8" x 2 3/4" Screws
(7) first and then tighten the four 3/8" x 1 1/4"
Screws (8) (only one side is shown).
Press the Left and Right Base Covers (82, 83)
onto the Base (94) until they snap into place.
14
83
8
82
94
7
1
3. Set the console assembly on the Right and Left
Handrails (87, 88). Be careful not to pinch any
wires. Insert the excess Upright Wire (not
shown) into the Left Handrail.
Attach the console assembly with six #8 x 1/2"
Screws (1) and two #8 x 3/4" Screws (2) (only
one side is shown). Start all eight Screws, and
then tighten each of them.
Attach two Console Clamps (106) to the console
assembly with four #8 x 1" Screws (25).
See step 7. Fully tighten the four 5/16" x 1"
Screws (5) and the two 5/16" x 1 1/4" Screws
(4).
88
1
13
Console
Assembly
1
87
2
25
1
1
25
106
106