NordicTrack C1650 - Page 14

14
14. Attach the Pulse Crossbar (93) to the console
assembly (J) with four #8 x 1/2" Screws (1); start
all four Screws, and then tighten them.
Then, firmly tighten the four 5/16" x 3/4"
Screws (4).
14
93
4
4
1 1
J
15. Carefully slide the Upright Crossbar (12)
between the Left and Right Uprights (89, 90).
Attach the Upright Crossbar with the four 5/16"
x 3/4" Screws (4) that you removed in step 5
and four 5/16" Star Washers (11); start all four
Screws, and then tighten them.
15
11
4
11
90
89
12
4
16. Attach the Tray (31) to the Upright Crossbar
(12) with four #8 x 3/4" Screws (2); start all four
Screws, and then tighten them.
16
2
12
2
31