To Next PageTo Next PageWhat to do if my NordicTrack Incline Trainer X9i power turns off during use?
If your NordicTrack Treadmill loses power during use, first, ensure the power cord is securely plugged in. If that doesn't solve the issue, unplug the cord, wait five minutes, and then plug it back in. Also, check the switch; if it has tripped, wait five minutes before pressing it back in.
How to fix a NordicTrack Incline Trainer X9i Treadmill that does not turn on?
If your NordicTrack Treadmill doesn't turn on, start by checking that the power cord is properly connected to both a surge suppressor and a grounded outlet. Next, ensure that the key is correctly inserted into the console. Finally, inspect the switch; if it's protruding, it may have tripped. Wait five minutes, then press the switch back in to reset it.
Why do the console displays remain lit when I remove the key from my NordicTrack Treadmill?
If the console displays on your NordicTrack Treadmill stay lit even after removing the key, it's likely that the demo mode is activated. To disable the demo mode, please refer to the specific instructions.
General| Brand | NordicTrack |
|---|---|
| Model | Incline Trainer X9i Treadmill |
| Category | Treadmill |
| Language | English |
Steps to safely connect the power cord using a surge suppressor.
Procedures for updating console firmware and calibrating the incline system.
Guides through connecting to a wireless network and managing connections.
Solutions for when the incline trainer fails to power on or shuts off unexpectedly.
Fixes for a walking belt that slows down or slips during use.
