Why does my NordicTrack Treadmill power turn off during use?
If your NordicTrack Treadmill turns off during use, check the power switch and ensure the power cord is properly plugged in. If it is, unplug the cord, wait five minutes, then plug it back in. Also, try removing and reinserting the key into the console. For further assistance, please consult the front cover of this manual.
What to do if my NordicTrack Incln Train X11i Intera Treadmill power does not turn on?
First, make sure that the power cord is plugged into a surge suppressor and that the surge suppressor is plugged into a properly grounded outlet. After plugging in the power cord, ensure that the key is inserted into the console. Check the power switch located on the treadmill. If the switch has tripped, wait five minutes, and then press the switch back in.
Why is my NordicTrack Incln Train X11i Intera Treadmill walking belt slowing down when I walk on it?
The walking belt may be slowing down for a few reasons. Ensure you are using a surge suppressor that meets all the specifications. Also, an overtightened walking belt can decrease performance and cause damage. If you suspect the belt needs more lubricant, please see the front cover of this manual for instructions.
Why do the console displays remain lit after removing the key from my NordicTrack Treadmill?
The console features a display demo mode, designed to be used if the incline trainer is displayed in a store.
How to reset incline if the incline of the NordicTrack Incln Train X11i Intera does not change correctly?
Hold down the Stop button and the Speed increase button, insert the key into the console, and then release the Stop button and the Speed increase button.
How to fix if my NordicTrack Incln Train X11i Intera Treadmill won't connect to my tablet?
To connect your NordicTrack Treadmill to your tablet, ensure the wireless settings on the console are correct and that the settings for your wireless network are also correct. Verify that both the console and your tablet are connected to the same network. For further assistance, please see the front cover of this manual.
How to fix NordicTrack Incln Train X11i Intera Treadmill not connecting to wireless network?
To connect your NordicTrack Treadmill to the wireless network, make sure that the wireless settings on the console and the settings for your wireless network are correct. If you still have questions, please see the front cover of this manual.
Solutions for common heart rate monitor operational issues.
Steps for safely connecting the power cord and using a surge suppressor.
How to start the belt and control speed during manual operation.
Instructions on how to adjust the incline level manually.
Procedure for updating the console's software for improved performance.
Steps to recalibrate the incline mechanism for accurate operation.
Solutions for when the incline trainer fails to power up.
General| Warranty | 10-Year Frame, 2-Year Parts, 1-Year Labor |
|---|---|
| Running Area | 22" x 60" |
| Incline | 0% to 40% |
| Decline | -6% |
| Speed | 0 to 12 mph |
| Display | 10" HD Touchscreen |
| Weight Capacity | 300 lbs |
| Footprint | 78" L x 35.5" W x 62" H |
| Heart Rate Monitoring | Yes (Bluetooth Chest Strap Included) |
| Programs | iFit Enabled |
| Dimensions | 78" L x 35.5" W x 62" H |
To Next Page