To Next PageTo Next PageWhat to do if NordicTrack NTEL99416.0 Fitness Equipment console does not display correct feedback?
If the console on your NordicTrack Fitness Equipment isn't displaying the correct feedback, the reed switch may need adjustment. Slightly loosen the two M4 x 16mm Screws. Slide the Reed Switch slightly toward or away from the Magnet, and then retighten the Screws.
How to turn on NordicTrack NTEL99416.0 console?
If the console of your NordicTrack Fitness Equipment does not turn on, make sure that the power cord is fully plugged in.
Why are the pedals slipping on my NordicTrack NTEL99416.0 Fitness Equipment?
If the pedals slip on your NordicTrack Fitness Equipment, even at the highest resistance, the drive belt may need adjustment. To resolve this, first turn off the power and unplug the power cord. Loosen the Idler Screw. Then, tighten the Idler Adjustment Screw until the Drive Belt is tight, and retighten the Idler Screw.
General| Model Number | NTEL99416.0 |
|---|---|
| Type | Treadmill |
| Speed Range | 0-12 MPH |
| Incline Range | 0-12% |
| iFit Compatible | Yes |
| Foldable | Yes |
| Warranty | 10-Year Frame, 2-Year Parts, 1-Year Labor |
| Motor | 3.0 CHP |
| Running Area | 60" |
| Weight Capacity | 300 lbs |
Register your product online or via customer care to activate your warranty.
Secure the front and rear stabilizers to the elliptical frame using provided hardware.
Raise the upright to vertical and attach upper body arms securely.
Mount the tablet holder to the console unit.
Connect the power cord to a grounded outlet for safety.
Steps for safely moving and stabilizing the elliptical.
Adjust pedal positions and use the tablet holder.
Guide on mounting, pedaling, and dismounting the elliptical.
Procedures for folding and storing the elliptical.
Overview of console diagram, display metrics, and features.
Instructions for operating the elliptical in manual training mode.
Understanding workout metrics and heart rate monitoring.
Navigating menus, controlling volume, and using scan modes.
How to choose and start pre-programmed workouts.
Understanding workout segment transitions and programmed changes.
Manually overriding resistance and incline during workouts.
Procedures for pausing, resuming, and completing workouts.
Download iFit app and connect tablet via Bluetooth.
Record workout data and disconnect the tablet.
Connect and disconnect compatible Bluetooth heart rate monitors.
Plug in and play music via the console's audio system.
Access and modify console settings like units and contrast.
Display total usage hours and distance pedaled.
Performing regular cleaning and tightening of elliptical parts.
Common issues like console not powering on or heart rate inaccuracy.
Procedure to adjust the reed switch for accurate feedback.
Steps to adjust the drive belt if pedals slip.
Using heart rate zones for fat burning and aerobic goals.
Recommended warm-up, training, and cool-down procedures.
Guidelines for workout frequency to maintain fitness.
