M
Mark HansonAug 8, 2025
How to turn on NordicTrack NTEX02422-INT.2 Elliptical Trainer console?
- CChristina WilliamsAug 8, 2025
Ensure that the power adapter is fully plugged in and the power switch is pressed on.
To Next PageTo Next PageHow to turn on NordicTrack NTEX02422-INT.2 Elliptical Trainer console?
Ensure that the power adapter is fully plugged in and the power switch is pressed on.
What to do if NordicTrack NTEX02422-INT.2 console freezes?
If the console does not boot up properly, or if the console freezes and does not respond, reset the console to the factory default settings.
What to do if the Left Crank Arm feels loose on NordicTrack Elliptical Trainer?
If the Left Crank Arm feels loose while you are pedaling, tighten the M12 Crank Screw (15) counterclockwise to 7 Nm (5 ft-lbs), then tighten each M6 x 25mm Screw (96) to 20 Nm (15 ft-lbs). Finally, tighten each M6 x 25mm Screw a second time to 20 Nm (15 ft-lbs) in the same order.
What to do if NordicTrack Elliptical Trainer pedals slip?
If you can feel the pedals slip while you are pedaling, loosen the M10 Axle Nut (27) on each side of the studio cycle, and tighten the Adjustment Nut (26) on each side of the studio cycle one half turn.
How to fix NordicTrack NTEX02422-INT.2 console that does not stay in place when tilted?
If the console does not stay in place when it is tilted upward and downward, tighten the four M6 x 15mm Cap Screws Mount (114) until the up and down movement no longer feels loose.
What to do if NordicTrack Elliptical Trainer console moves from side to side?
If the console does not stay in place when it is moved from side to side, use the included studio cycle tool to tighten the M25 Locknut (152) slightly.
General| Model | NTEX02422-INT.2 |
|---|---|
| Type | Elliptical Trainer |
| Bluetooth Connectivity | Yes |
| Weight Capacity | 300 lbs |
| Flywheel Weight | 32 lbs |
| iFit Compatibility | Yes |
| Built-in Speakers | Yes |
| Fan | Yes |
| Water Bottle Holder | Yes |
| Stride Length | 20 inches |
Console features wireless tech, iFIT, and workout guidance.
Connects console to Wi-Fi for iFIT features.
Accesses iFIT workouts and features.
Ensures accurate incline/decline movement.
Adjusts workout features like active pulse.
Installs the latest software for the console.
Connects to available Wi-Fi networks.
Resolves issues with the console not turning on.
Guides on finding proper workout intensity levels.
