15
12. Attach the console assembly (J) to the Handrails
(74) with four 5/16" x 2" Screws (2) and four
5/16" Star Washers (8); start all four Screws,
and then tighten them. Be careful not to
pinch the wires (O).
13. Insert the wires (L, M) into the top of the Right
Upright (84).
Next, locate the Wire Tie (99) included with the
hardware. Insert the Wire Tie through the small
hole in the side of the Right Upright (84). Then,
tighten the Wire Tie around the wires (L, M), and
cut off the end of the Wire Tie.
13
99
84
L, M
12
2
8
J
8
2
74
74
O
To Next Page
Loading...
