8
104
4. Hold the Rear Stabilizer (5) in the bracket on the
Frame (1), and attach it with an M10 x 100mm
Screw (102); do not fully tighten the
Screw yet.
Finish attaching the Rear Stabilizer (5) with two
M10 x 60mm Screws (103).
Then, fully tighten the M10 x 100mm
Screw (102).
4
102
5
91
5
1
5. Avoid damaging the tabs on the Stabilizer
Cover (91).
Orient the Stabilizer Cover (91) as shown, press
it onto the Rear Stabilizer (5), and attach it with
four M4 x 19mm Screws (104); start all four
Screws, and then tighten them.
5
104
103
To Next Page
Loading...
