To Next PageTo Next Page
What to do if NordicTrack T20.0 Treadmill power does not turn on?
First, ensure that the power cord is correctly plugged into a properly earthed outlet. Then, with the power cord plugged in, verify that the key is inserted into the console. Finally, check the power switch located on the treadmill frame near the power cord. If the switch has tripped (protrudes), wait five minutes, and then press the switch back in to reset it.
What to do if NordicTrack T20.0 Treadmill power turns off during use?
If the power turns off during use, check the power switch. Also, make sure that the power cord is plugged in properly. As an additional measure, remove the key from the console and then reinsert it.
How to reset incline on NordicTrack T20.0 Treadmill?
To reset the incline, hold down the Stop button and the Speed increase button simultaneously. While holding them down, insert the key into the console, and then release both buttons.
How to turn off demo mode on NordicTrack T20.0?
To turn off the demo mode, hold down the Stop button for a few seconds.
General| Speed | 0 - 12 mph |
|---|---|
| Display | 10" Touchscreen |
| Weight Capacity | 300 lbs |
| Programs | iFit enabled |
| Bluetooth | Yes |
| Cooling Fan | Yes |
