11
9. Remove and discard the four indicated
screws (C).
C
9
C
10. IMPORTANT: To avoid damaging the
Crossbar (93), do not use power tools and do
not overtighten the #10 x 3/4" Screws (9).
Orient the Crossbar (93) as shown. Tighten four
#10 x 3/4" Screws (9) about halfway into the
Handrails (87, 88). Next, slide the Crossbar as
far forward as possible. Then, tighten the four
Screws.
93
88
9
10
9
87
To Next Page
Loading...
