To Next PageTo Next PageWhat to do if my NordicTrack T5.7 NTL61011.1 Treadmill power turns off during use?
If your NordicTrack Treadmill loses power during use, first, check the power switch located on the treadmill frame near the power cord. If the switch has tripped, wait five minutes, then press it back in to reset it. Also, ensure the power cord is securely plugged in. If it is, unplug it, wait five minutes, and then plug it back in.
How to fix NordicTrack T5.7 NTL61011.1 when power does not turn on?
If your NordicTrack Treadmill doesn't turn on, ensure the power cord is plugged into a surge suppressor, and the surge suppressor is plugged into a properly grounded outlet. Also, after plugging in the power cord, make sure the key is inserted into the console. Check the power switch on the treadmill frame near the power cord. If it's tripped (protruding), wait five minutes, then press it back in to reset.
Why does my NordicTrack T5.7 NTL61011.1 Treadmill console stay on after removing the key?
If the console displays on your NordicTrack Treadmill remain lit even after removing the key, it's likely that the demo mode is activated. To deactivate it, simply hold down the Stop button for a few seconds. If the displays are still lit, see THE INFORMATION MODE on page 21 to turn off the demo mode.
General| Brand | NordicTrack |
|---|---|
| Model | T5.7 NTL61011.1 |
| Category | Treadmill |
| Language | English |
Steps to resolve issues when the treadmill fails to power up.
Solutions for the treadmill shutting off unexpectedly during operation.
Guidance for resolving console display malfunctions.
Procedure for recalibrating the treadmill's incline system.
Addresses issues where the walking belt loses speed during workouts.
Instructions for centering and tightening the walking belt.
