To Next PageTo Next Page
Need help?Do you have a question about the Nordyne KG7TC and is the answer not in the manual?
General| Brand | Nordyne |
|---|---|
| Model | KG7TC |
| Type | Gas Furnace |
| Heating Capacity | 40, 000 - 120, 000 BTU/h |
| Blower Type | Variable Speed |
| Vent Type | Category I |
| Fuel Type | Natural Gas |
| Blower Motor | Electronically Commutated Motor (ECM) |
| Ignition Type | Direct Spark |
Clearances and placement requirements for horizontal vent pipe terminations.
Information on rotating the inducer assembly for flexible venting configurations.
Detailed steps for rotating the inducer assembly to different positions.
Guidelines for connecting the furnace's main power supply.
Wiring diagrams and instructions for connecting the thermostat to the furnace.
Essential checks to verify correct installation and wiring before initial startup.
Step-by-step instructions for safely starting the furnace for the first time.
Method to measure and adjust furnace gas input rate to prevent over-firing.
Ensuring the temperature rise through the furnace is within specified limits.
Testing the supply air limit switch function to ensure proper shutdown on airflow blockage.
Detailed sequence of operations for the furnace during a heating call.
Table indicating natural gas heating values (LOW/HIGH) at different altitudes.
Orifice sizes and manifold pressures for natural gas (low value) at various altitudes.
