Do you have a question about the Noritz CB199-DV and is the answer not in the manual?
Model | CB199-DV |
---|---|
Type | Condensing |
Category | Boiler |
Heating Capacity | 199, 000 BTU/h |
Maximum Input | 199, 000 BTU/h |
Efficiency | 95% |
Energy Factor | 0.95 |
Fuel Type | Gas |
Thermal Efficiency | 95% |
Water Connection Size | 3/4" NPT |
Weight | 69 lbs |
Voltage | 120V |
Gas Type | Natural Gas |
Vent Size | 3" / 4" |
Vent Diameter | 3" / 4" |
Details of accessories included with and available as optional for the Combi Boiler unit.
Key technical data, including gas input, DHW capacity, and operational parameters.
Diagrams and details of the unit's physical size and connection ports for various systems.
Defines safety symbols (DANGER, WARNING, CAUTION) and general safety rules for operation.
Essential checks before installation, covering gas, power, and water supply quality.
Guidelines for selecting an appropriate and safe location for the Combi Boiler.
Specifies required clearances from combustibles and for service access.
Step-by-step instructions for securely mounting the unit to a wall.
Guidelines for installing the vent system, including materials and clearances.
Instructions and considerations for safe and compliant gas piping.
Details on connecting potable water and heating system piping, including freeze prevention.
Specific requirements for installing the hydronic heating loop, including expansion tanks.
Instructions for installing the low water cutoff device for safety.
Guidance on installing pressure relief valves for DHW and heating systems.
Instructions for properly installing and draining acidic condensate.
Requirements for safe electrical grounding, wiring, and breaker installation.
General principles and symbols for plumbing system design and installation.
Instructions for connecting and controlling an air handler with the Combi Boiler.
Steps for the initial startup, water filling, and system pressurization.
Explanation and setup guide for the outdoor temperature reset control.
Guide to accessing and configuring various operational parameters in installer mode.
Comprehensive checklist to ensure all installation steps are correctly completed.
Guidelines for periodic checks and cleaning to ensure optimal operation and safety.
A log to track completed inspection and maintenance activities.