Noritz N-063S - How to Use (Not Using the Remote Controller); Setting and Using the Water Heater

16
3
Mix for desired temperature.
The factory temperature setting is 120°F (fixed). Mix with cold water with a mixing valve
or at the fixture for desired temperature.
To prevent scalding.
Check the temperature of the running hot
water before using. Temperatures above
125°F can scald instantly.
1
Check that electrical power is connected.
2
4
How to Use (Not using the remote controller)
Setting and Using the Water Heater
Te
mperature
If you want to the temperature to be changed to 130°F or 140°F, contact the installer or Noritz.
Turn on hot water.
Turn off the hot water.
WARNING
High Temperature
The electrical power does not need to
be disconnected between uses.
Hot water
Water
scalding.scalding.
En069M/n063S(1426)J.p65 05.10.11, 10:56 PMPage 16 AdobePageMaker6.5J/PPC