What to do if my NORPOLE NPCIM120H Ice Maker shows 'E04' error?
If the NORPOLE Ice Maker displays an 'E04' error code, it indicates a high temperature issue. Ensure the unit is in an environment with an ambient temperature between 41-104°F (5-40°C). Also, clean the condenser and ensure nothing is blocking airflow. Finally, check that the fan is running and is free from obstructions.
Why is my NORPOLE Ice Maker ice making process too slow?
If your NORPOLE Ice Maker is producing ice too slowly, several factors could be at play. First, clean or replace the condenser and air filter if they are dirty. Ensure the unit is in an environment with an ambient temperature between 41-104°F (5-40°C). Also, make sure there is adequate space around the unit for proper ventilation. Finally, verify that the water temperature is between 41-95°F (5-35°C).
What to do if the indicator is ‘Off’ on my NORPOLE NPCIM120H Ice Maker?
If the indicator light on your NORPOLE Ice Maker is off, first ensure that the power switch is turned on. Next, verify that the plug is securely connected to a working outlet.
Why is my NORPOLE Ice Maker not defrosting?
If the NORPOLE Ice Maker is not defrosting properly, make sure the unit is installed somewhere with an ambient temperature of 41-104°F (5-40°C). Check the defrost valve and correct any issues if found. Also, check the ice thickness setting.
What does 'E06' error mean on my NORPOLE NPCIM120H?
If the NORPOLE Ice Maker displays an 'E06' high pressure error code, check and connect the wires on the high pressure switch.
Why are the ice cubes from my NORPOLE NPCIM120H too thin?
If your NORPOLE Ice Maker is making ice cubes with poor transparency, or the ice cubes are too thin or incomplete, check the ice thickness setting. Verify that the water supply pressure is 1.3 Bar to 5.5 Bar. Ensure the water temperature is between 41-95°F (5-35°C). Check the water inlet valve and correct any issues. Check all water connections and tighten as needed. Replace the water inlet filter if it hasn't been replaced for a long time.
Lists critical safety warnings and cautions for operating the ice maker.
Details specific dangers and handling instructions for R290 refrigerant.
Explains the functions of the LED display, indicators, buttons, and error codes.
A table guiding users through diagnosing and resolving common operational problems.
General| Ice Type | Crescent |
|---|---|
| Cooling System | Air-Cooled |
| Voltage | 115V |
| Daily Ice Production | 120 lbs |
| Power Supply | 60Hz |
| Operating Environment Temperature | 50-100°F |
| Water Temperature Range | 41-90°F |
To Next Page
