8
It contains:
• 5 port x RJ45
• DIN rail mounting
• Power 24V DC + ground
The Access Point is a high sensitive receiver for the wireless panel build for maximum range and durability. The
Access Point communicate with the wireless bus, witch remotely controls the searchlights with R50 motor unit. The
control system is based on TCP/IP technology were several different Operator Panel can control separately up to 9
searchlights of Xenon or Halogen. The system is connected to the same network through LAN switch to connect to
a network of searchlights. Control panels both hard wired and wireless, are fitted into a standard solution.
1.4 The Ethernet Switch:
1.5 High Sensitive Receiver:
To Next Page
Loading...
Need help?
General
