NORSKE NMAP004 User Manual

13” INDUSTRIAL SIDING + LAMINATE CUTTER
WITH SLIDING TABLE EXTENSION
OWNERS MANUAL
REVETREMENT EXTÉRIEUR INDUSTRIEL
JUSQU’À 13” + COUPE DE STRATIFIÉE
AVEC TABLE EXTENSIONS COULISSANTE
MANUEL D’UTILISATION
WARNING
Read and understand all instructions. Failure to follow all instructions may result in serious bodily injury.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
AVERTISSEMENT
Lire et comprendre toutes les directives. Le non-respect des directives peut causer des blessures graves.
VEUILLEZ CONSERVER CES DIRECTIVES POUR RÉFÉRENCE ULTÉRIEURE.

NORSKE NMAP004 Specifications

General

Brand	NORSKE
Model	NMAP004
Category	Cutter
Language	English

Summary

Norske 13" Industrial Siding & Laminate Cutter Owner's Manual

Safety Information

Covers initial warnings, safety rules, and the critical sharp blade warning.

Setup and Assembly

Cutter Assembly

Step-by-step instructions for assembling the table and handle components.

Setting Up for Operation

Procedures for unlocking the blade assembly and preparing for use.

Cutting Procedures and Adjustments

Basic, Repeat, and Angle Cutting

Guides for performing standard, repetitive, and angled cuts with the cutter.

Table Extension Adjustment

Instructions on how to adjust the sliding extension table for longer boards.

Blade Management and Maintenance

Blade Adjustment and Cut Guide

Details on adjusting the cutter blade and a guide for recommended materials.

Blade Honing, Sharpening, and Lubrication

Procedures for maintaining the blade and lubricating the cutter for longevity.

Parts Identification

Exploded Parts Diagram

Visual representation of all cutter components with numbered parts.

Parts List

A comprehensive list of all parts, including descriptions and quantities.