Language [Feature] IF]
q q q
Selects the English language for the telephone display.
Choice
[Fealuie] IF]
q q q
Selects the alternate language for the telephone display.
Moving Line
[Feature] IF] m q
Changes the position of a line button. Remember to switch the
Buttons
button caps after the line button is moved. Lines cannot be moved
to positions occupied by 1-1, [s], or [Answer]
buttons. This feature is not available on the M7100 Telephone.
Programming [Feature] l”i
q q
Select the type of calls that will be automatically stored in your
Call Log
Call Log.
Programming [FeatureI W 0
External Autodial: Stores a line (optional) and an external
memory
telephone number onto a memory button for one button access to
buttons
that number.
jr] [Fj q
Internal Autodial: Stores an internal telephone number onto a
memory button for one-button access to that telephone number.
[Feature] [F] m Program Features: Stores a feature onto a memory button for
one-button access to that feature.
Ring Type
Note: 1-1, IlnterCOmJ, [Answer], or [Handsfree] cannot be programmed.
Programming a feature button:
1. Press [Fealurej [y]
q
(For M7100 Telephones, go to step 3.)
2. Press the memory button you want to program.
3. Enter the feature code of the feature you want to program.
4. If you entered the Line Pool feature code in step 3, enter the access code for a line pool.
[Feature] [pq q
Selects a distinctive ring to help differentiate between your
telephone and others nearby. Enter the feature code and press
NEXT or
q
through m to select the new Ring Type. Press
[Hold] or OK to store the new ring.
Ring Volume
71 IT] @ a Makes your telephone ring so you can adjust the volume, even
while vou are on a call.
Run/Stop
When using the External Autodial programming feature, inserts a
break point between two or more numbers stored on a memory
button. Press the memory button once to dial the first number; a
second time to dial the second number, and so on.
To Next Page
Loading...
Need help?
General
