Norstar DR5 - Speed Dial; Programming a Personal Speed Dial Code; Remote System Signaling; Link

Speed Dial
Personal: Programs a telephone number into a Personal Speed
Dial code (from 71 to 94).
Programming a Personal Speed Dial code:
1. Press 71 [TJ q to enter Personal Speed Dial codes.
2. Enter a two-digit code (from 71 to 94).
3. To program a line as part of the Speed Dial code, press a line button or a line pool
button.
4. Enter the telephone number to be assigned to that code. Telephone numbers cannot
exceed 24 digits.
5. Press [HoldI or 0~ to finish programming.
Voice Call
Deny
Prevents your telephone from receiving Voice Calls, permits only
ordinary ringing calls.
Cancel
[Feature/ [Fi q q
Link
Pause
Programmed
Release
1-j [Tj q
Generates a Link signal (also called flash or recall) on an active
line to access other systems or carriers.
When programmed in an External Autodial sequence, inserts a
1.5second delay in a number being dialed.
[Feature] 171 q
For Pulse and Tone Dialing
IT
For Pulse Dialing only
[Feature] [pq q q
When programmed at the end of an External Autodial sequence,
performs the same function as @.