Need help?Do you have a question about the Norstar DR5 and is the answer not in the manual?
Explains how to use a Norstar feature by entering a code or pressing a memory button.
Details the steps to program a Norstar feature onto a memory button for quick access.
Allows the oldest Call Log entry to be deleted when a new item is logged.
Enables listening to music through the telephone speaker when not on a call.
Checks what is programmed on any telephone button for labeling.
Programs a password for your Call Log to secure stored caller information.
Overrides Class of Service to allow calls, based on programmed restrictions and password.
Adjusts the contrast of the telephone display for better readability.
Changes how telephone numbers are dialed, offering Automatic, Pre-Dial, and Standard modes.
Prevents incoming calls from ringing at your telephone to avoid interruptions.
Selects the language displayed on the telephone screen, English or alternate.
Changes the position of a line button; requires switching button caps.
Selects the type of calls automatically stored in the Call Log.
Stores external or internal numbers, or features, onto memory buttons for one-button access.
Selects a distinctive ring to differentiate telephone calls.
Adjusts the telephone's ring volume, even while on a call.
Inserts break points in Autodial sequences for dialing multiple numbers sequentially.
Programs telephone numbers into Personal Speed Dial codes for quick dialing.
Generates a Link signal (flash or recall) to access other systems or carriers.
Inserts a 1.5-second delay in a number being dialed during an Autodial sequence.
Performs the same function as 'Ris' when programmed at the end of an Autodial sequence.
Briefly displays the length of the current or most recent call.
Opens the Call Log to view stored caller information, using special characters.
Allows replying to messages, returning calls, or sending messages to colleagues.
Makes announcements through internal, external, or both speakers, to specific zones.
Activates telephone answering options, managed by a Control Telephone.
Briefly displays the current date and time on the telephone.
Sends incoming calls to another telephone within the Norstar system.
Briefly displays name, number, and line name of a ringing or held call.
Automatically holds a call for retrieval from any telephone using a retrieval code.
Details how to set up, split, and remove oneself from a three-person conference call.
Temporarily suspends an external call, preventing others from picking it up.
Allows using receiver and speaker simultaneously, with mute option.
Stores caller information for the current active call in your Call Log.
Controls whether other users on the same line can join your external call.
Sends a call to another telephone, with options for announcing or immediate transfer.
Allows answering selected, group, or trunk calls, directed or from any phone.
Answers calls arriving simultaneously, prioritizing the longest ringing external call.
Automatically redials the last external telephone number dialed.
Enables sharing external lines for outgoing calls without dedicated buttons.
Interrupts calls or overrides Do Not Disturb settings for urgent calls.
Signals when a busy line or Line Pool becomes available for calling back.
Stores and redials the last dialed external number when inactive.
Initiates a conversation via speaker without ringing the other telephone.
To Next Page
General