User Guide
Applicable to Norstar Telephones M7208, M7208N, M7310, M7310N, M7324 and M7324N
Using display keys Handset/speaker volume Handsfree
Key enquiry Answering calls Memory keys
Adjusting display Making calls Programming keys
Ring type & volume level Holding calls
Using display keys
Three display keys appear directly below the display. When they are active, these keys are labelled in
capital letters on the bottom line of the display.
Please note that the Older style Norstar telephone display is shown above but the new type (suffix N)
telephone display is very similar.
Key Enquiry
Check what is programmed on your memory keys.
1. Release all calls or open lines with dial tone.
2. Press Feature *0.
3. Press the key(s) that you want to check and read display.
4. Press Feature when finished.
Adjusting the display contrast
M7310, M7310N, M7324 & M7324N
1. Press Feature *7.
2. Press display keys labelled UP or DOWN for level you want.
3. Press the display key labelled OK when finished.
M7208 & M7208N
1. Press Feature *7.
2. Press 1 to 9 for the level you want (high number = high level).
Selecting a ring type and volume level