3.WAVE SPECIFICATIONS
Mechanical Specifications
Dimensions: 125 mm (158mm including antenna) x 68 mm x 28 mm (35mm including
belt clip)
Weight: 300 g
Enclosure: Hard plastic/EMI shielding + soft over-mold for grip
Connectors: USB-C connector (wired for USB 2.0, RS-232, and two GPIO’s) with a
custom breakout cable available if RS-232 or GPIO’s required.
Antennas: Embedded helical for Iridium and patch for GPS
Keys: 7 (Up, Down, Left, Right, Enter, Emergency with red LED, Power with green LED)
Screen: Resistive 240 x 400 color touchscreen
Electrical Specifications
Main Input Voltage: 5.0VDC USB-C, RS-232, 3.0VDC GPIO’s
Battery Type: Lithium-ion
Battery Capacity: 2200 mAh, 3.6V nominal
Charging Voltage: 5.0VDC, USB 1.0, USB 2.0
Charging Current: 500mA
Rechargeable Cycles: 500 times
Iridium Transceiver
Operating Frequency: 1616 to 1626 MHz
Duplexing Method: TDD
Multiplexing Method: TDMA/FDMA
Link Margin Downlink: 13 dB average (free space)
Link Margin Uplink: 7 dB average (free space)
GPS Receiver
GPS Receiver: UBlox MAX-M8Q
Receiver Type: L1 (1575.42 MHz), C/A, 72-channel
Update Rate: 18 Hz
Accuracy: 2.5 m CEP (position)
Acquisition:29 seconds cold-start
1 second hot-start
Sensitivity: –166 dBm (tracking)
–160 dBm (reacquisition)
–148 dBm (cold-start)
–157 dBm (hot-start)
To Next Page
Loading...