Nortek 2GIG e Series - System History Log and Testing

Copyright © 2019 Nortek Security & Control
27
GC2e Wireless Security System | User Guide
Recurring User Access Schedules
You can dene up to 7 Access Schedules for user codes
with and Access Option of Always.
1 For the schedule type, select Always.
2 To view the User Access Schedule screen, tap the
calendar button.
3 Select the day(s) of the week that this user code will be
valid with the check boxes.
4 Tap the left and right time buttons to set the starting
and ending times that this user code will be valid on the
selected days of the week.
5 Tap OK to accept the schedule, or Cancel to return to
the Schedule Type screen.
Date User Access Schedule
1 For the schedule type, select Date.
2 To view the User Access Schedule screen, tap the
calendar button.
3 To set the only month, day, and year that this user code
is valid, tap the date button.
4 Tap the left and right time buttons to set the start and
end times that this user code is valid on that date.
5 Tap OK to accept the schedule, or Cancel to return to
the Schedule Type screen.
Date Range User Access Schedule
1 For Schedule type, select Date Range.
2 To view the User Access Schedule screen, tap the
calendar button.
3 Tap the rst day button to set the month, day, and year
that this user code will rst become valid.
4 Tap the last day button to set the month, day, and year
that this user code will last be valid.
5 Tap the left and right time buttons to set the starting
and ending times that this user code is valid during the
date range.
6 To accept the schedule, tap OK or Cancel to return to
the Schedule Type screen.
Deleting User Access Schedule
1 On the User Management screen, select a user code
that has a calendar schedule icon.
2 Tap the Edit Schedules button.
3 On the User Access Schedule screen, select the
schedule to delete.
4 On the Schedule Type screen tap Delete.
5 A conrmation screen appears to verify that you want
to delete the User Access Schedule. If Ok, tap Delete
Schedule or tap Cancel to return to the User Access
Schedule screen.
6 6 A second screen conrms that the schedule was
deleted. Tap OK.
User Codes
Changing a User Code
1 At the User Management screen, tap the User button
to change the user code.
2 Ensure that the current user code appears. Then tap
Change Pin.
3 Enter a new four (4)-digit user code to use as the PIN.
Then tap OK.
System Toolbox