Copyright © 2019 Nortek Security & Control
6
GC2e Wireless Security System | User Guide
CONTROL PANEL FEATURES
See the table below for full descriptions of Control Panel Features.
A
C
B
D
E
A
Alarm Sounder and Speaker
Sounds all system local alarms, voice prompts, system sounds, and audio for two (2)-way
voice communications with the Central Station
B
Color Display with Touchscreen
Displays all system information, status, programming, and functions as the keypad.
The display cycles clock, calendar, and weather with an Alarm.com account (tap manually to
change)
C
Emergency Button/Indicator
Illuminates WHITE when enabled for emergency alarms and flashes during emergency
alarms
D
Microphone Used for voice communication with the Central Station
E
Home Button/Indicator
Sensor Status
Illuminates BLUE when all sensors are closed (Ready to Arm)
Not lit when any sensor is open (not Ready to Arm)
Arming Status
Illuminates RED when system is armed
Flashes RED during the Entry Delay
Alarm Memory
Flashes RED during an alarm
Flashes RED after an alarm while system is still armed
Power Outage
Flashes WHITE during power outage (system on battery backup)
Flashes BLUE when all sensors are closed (Ready to Arm)
Flashes PURPLE when any sensor is open (not Ready to Arm)
Flashes RED while system is armed
System Overview
To Next Page
Loading...
Need help?
General
