Need help?Do you have a question about the Nortek Aquadopp Profiler and is the answer not in the manual?
General| Type | Acoustic Doppler Current Profiler (ADCP) |
|---|---|
| Number of Cells | Up to 128 |
| Temperature Sensor Accuracy | ±0.1°C |
| Compass Accuracy | ±2° |
| Beam Angle | 25° |
| Operating Temperature | -5°C to +40°C |
| Storage Temperature | -20°C to +60°C |
| Measurement Principle | Acoustic Doppler |
| Maximum Profiling Range | Up to 100 m (depending on frequency) |
| Velocity Accuracy | ±0.5% of measured velocity ±1 mm/s |
| Accuracy | ±0.5% of measured velocity ±1 mm/s |
| Velocity Resolution | 1 mm/s |
| Beam Configuration | 3-beam or 4-beam |
| Communication Interface | RS-232 |
| Housing Material | Titanium |
| Depth Rating | Up to 300 m (depending on housing) |
| Data Output | Binary or ASCII |
| Frequency | 1 MHz, 2 MHz |
Steps for initial setup including connecting cables and installing software.
Configuring instrument parameters for a specific deployment operation.
Initiating data recording, setting time, and defining file parameters.
Procedure for ending data acquisition and viewing clock times.
Accessing and selecting recorded data files from the instrument.
Converting binary data files to a readable ASCII format.
Acquiring data in real-time and saving it to disk.
Guidelines for proper instrument mounting for successful data collection.
Details on RS232 and RS422 communication cables and their wiring.
Information on reading two analog inputs with the instrument.
Specifications for DC input voltage and battery power.
Reference for controlling Nortek products with non-PC controllers.
Guidance on common issues and contacting support.
To Next Page
