Need help?Do you have a question about the Nortek DVL 1000 300m and is the answer not in the manual?
General| Model | DVL 1000 300m |
|---|---|
| Manufacturer | Nortek |
| Category | Measuring Instruments |
| Depth Rating | 300 m |
| Measurement Principle | Doppler |
| Operating Frequency | 1 MHz |
| Velocity resolution | 0.1 mm/s |
| Number of beams | 4 |
| Velocity Range | ±5 m/s |
| Communication Interface | RS232, RS485 |
| Storage Temperature | -20°C to 55°C |
Instructions for connecting the DVL to a PC via Ethernet or serial communication.
Accessing and using the DVL's web interface for configuration and monitoring.
Performing tests on sensors (temperature, pressure) and transducers before deployment.
Final pre-deployment steps including connector care, recorder setup, and settings.
Settings for trigger mode, sample rate, speed of sound, salinity, and data recording.
Recommendations for mechanical alignment and beam clearance during installation.
Procedures for cleaning and lubricating connectors before and after use.
Instructions for inspecting, cleaning, and maintaining O-rings for watertight sealing.
Steps to diagnose and resolve communication issues, particularly with Ethernet connections.
To Next Page
