32
1. Standard length of connection pipe
ƔP(16 ft)P(IW)P(26 ft).
4. The additional refrigerant oil and refrigerant charging required after extending
connection pipe
Ɣ $IWHUWKHOHQJWKRIFRQQHFWLRQSLSHLVH[WHQGHGIRUP(33 ft)at the basis of
VWDQGDUGOHQJWK\RXVKRXOGDGGPO(3/16 oz)of refrigerant oil for each
DGGLWLRQDOP of connection pipe.
Ɣ The calculation Pethod of additional refrigerant aPount (on the basis
of liquid pipe):
ƔBasing on the length of standard pipe, add refrigerant according to the
requirement as shown in the table. 7KHDGGLWLRQDOUHIULJHUDQWFKDUJLQJDPRXQW
per foot is difIHUHQWDFFRUGLQJWRWKHGLDPHWHURIOLTXLGSLSH6HHWKH
following sheet.
$GGLWLRQDOUHIULJHUDQWDPRXQW = additional length of liquid pipe ×
DGGLWLRQDOUHIULJHUDQWFKDUJLQJDPRXQWSHUIRRW.
Cooling
capacity
Cooling
capacity
%WXK
:
%WXK
:
%WXK
:
%WXK
:
%WXK
:
%WXK
:
%WXK
:
%WXK
:
%WXK
:
%WXK
:
Max height
difference
Max height
difference
Max length
of connec-
tion pipe
Max length
of connec-
tion pipe
(IW)
(IW)
(IW)
(IW)IW
IW
IW
10(33 ft)
10(33 ft)
30(100 ft)
30(100 ft)
30(100 ft)
30(100 ft)
IW
IW
IW
IW
IW
10(33 ft)
10(33 ft)
0LQOHQJWKRIFRQQHFWLRQSLSHLVP(10 ft).
0D[OHQJWKRIFRQQHFWLRQSLSHDQGPD[KLJKGLfference.
Configuration of connection pipe