To Next PageTo Next Page
Need help?Do you have a question about the Nortel 5520-24T-PWR and is the answer not in the manual?
Describes the configuration of the Nortel 5520-24T-PWR switch and various Avaya IP Telephones.
No specific configuration is required on Avaya endpoints for PoE usage.
Details the process to enable/disable PoE on specific ports via the CLI.
Commands to display device class and power measurements on the switch.
Confirms the Nortel switch successfully powered all tested Avaya devices.
General| Model | 5520-24T-PWR |
|---|---|
| Total Ports | 24 |
| Port Type | 10/100/1000Base-T |
| PoE Support | Yes |
| Switching Capacity | 56 Gbps |
| Forwarding Rate | 41.7 Mpps |
| Power Supply | Internal |
| PoE Power Budget | 370W |
| VLAN Support | Yes |
| Quality of Service (QoS) | Yes |
| AC Input Voltage | 100-240V AC |
| Product Type | Ethernet Switch |
| Product Series | 5500 |
| PoE Standard | IEEE 802.3af, IEEE 802.3at |
| Uplink Ports | 4 SFP |
| Management Type | CLI, Web, SNMP |
| Layer | Layer 3 |
| Operating Temperature | 0 to 50°C |
| Dimensions (W x D x H) | 440 x 44 x mm |
| Weight | 4.5 kg |
| Jumbo Frame Support | Up to 9216 bytes |
