Need help?Do you have a question about the Nortel BCM50 3.0 and is the answer not in the manual?
General| Maximum number of users | 50 |
|---|---|
| Voicemail ports | 4 |
| Maximum Extensions | 50 |
| Supported Protocols | H.323, SIP |
| Power Supply | 100-240 VAC, 50-60 Hz |
| Operating Temperature | 0 to 40°C |
| Humidity | 10 to 90% relative humidity, non-condensing |
Provides a checklist of tasks for system setup.
Procedures for mounting BCM50 units.
Guide for installing BCM50 units in equipment racks.
Guide for mounting BCM50 units onto a wall.
Guide for placing BCM50 units on a flat surface.
Procedures for connecting the system's power supply.
Procedures for connecting expansion units to the main unit.
Details on connecting the power supply to the BCM50.
Information on connecting telephones via the RJ-21 connector.
Configuring essential system settings.
Setting up dynamic IP address assignment.
To Next Page
