DMS-100 Family XPM International Translations Reference Manual XPM12 and up
4-1
Remote Switching Center-SONET
(UK / Europe)
Understanding RSC-S translations
You must understand the Remote Switching Center-SONET (RSC-S)
methods and terminology before you enter data in the product. This chapter
describes the product in general terms as a background to enter data in the
RSC-S. The information in this section is for RSC-S functions in
UK/Europe.
Differences between RSC and RSC-S
The RSC-S is like the RSC. The RSC-S is available with or without
integrated services digital network (ISDN), like RSC. The RSC-S requires
the same basic call processing software that the RSC uses as a requirement
to install RSC-S.
The RSC-S is an improved version of the RSC product. New software
functionality, revised system architecture and part packaging implement
these improvements. Software packages are provided to support
international technology for international offices.
Software functionality
Software features for the RSC-S are obtained through a collection of
standard RSC packages and the RSC-S basic package. Each feature is
provisioned through RSC packages. The RSC-S basic package activates
these features and provides specified RSC-S abilities.
The RSC-S improves the basic call processing of the RSC. The RSC-S
provides an improvement in abilities for intraswitching and emergency
stand-alone (ESA) failure contingency services.
To Next Page
Loading...
Need help?
General
