Need help?Do you have a question about the Nortel Norstar M7208 and is the answer not in the manual?
Describes the telephone's display for call information and the indicators for active lines and features.
Explains the function of key buttons including Feature, Release, Hold, Dial Pad, Volume Control, and Memory/Line buttons.
Guides on checking button programming and adjusting the display contrast for better readability.
Details how to select different ring types and adjust their volume levels on the telephone.
Provides instructions for adjusting the volume of the telephone's receiver or built-in speaker.
Introduces different types of line buttons available on Norstar systems for call handling.
Instructions for making internal calls via intercom or extension buttons and external calls via line buttons.
Explains how to place calls on hold manually and the function of automatic hold when switching lines.
Details how to use the Handsfree button for calls and the Mute function to silence the microphone.
Procedure for dialing calls without picking up the receiver, using speakerphone or handset.
Explains that memory buttons store numbers or feature codes for one-touch dialing or activation.
Step-by-step guide to program external phone numbers into memory buttons for autodialing.
Instructions for programming internal telephone numbers into memory buttons for quick access.
Details on how to program memory buttons with specific feature codes for activation.
Procedure for removing programmed numbers or features from memory buttons.
To Next Page
General
