North Star 5044310 - Page 49

49
Assembly Instructions
Step 4 – Outrigger Leg to Tank
• Connect the rear outrigger leg to the backside of the hydraulic tank
assembly
• Tighten nut until snug then back off 1/2 turn
• NOTE: Once the Outrigger Leg is installed, lock the leg in the down
position.
Tools Needed
• 15mm Wrench
• 16mm Wrench
Out Rigger Leg
Bolt
Washer
Out Rigger to Tank
Flange Bolt
Qty 1
Out Rigger to Tank
Washer
Qty 1
Out Rigger to Tank
Nyloc Nut
Qty 1
Fasteners Needed from Parts Bag:
Nut