EasyManua.ls Logo

North Star A1573701 - User Manual

North Star A1573701
52 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
1
MA1578111X.2
Owner’s Manual
Pressure Washer Pump: For high pressure
cleaning machines.
Pump is shipped with oil.
Must check oil level before use.
- Remove shipping plug and install vented fill cap. (Comet Pumps)
- Remove shipping tape and vlack vent plug (if present) from oil fill cap.
(Cat Pumps)
- Remove shipping plug and install dipstick. (General Pumps)
- Remove shipping plug and install dipstick. (NorthStar Pumps)
- Remove shipping plug and install vented fill cap. (Powerhorse Pumps)
- See pump oil cap section of this manual.
Closely inspect all components.
-If you have damaged components then: Contact the freight company that
delivered the unit and file a claim.
-If you have missing components then: Contact Customer Service at
1-800-270-0810.
Read this manual.
Serious injury or death can result if safety instructions are not followed.
WARNING
Any Questions, Comments, Problems or Parts Orders
Call NorthStar Product Support 1-800-270-0810
ITEM NUMBERS:
A1573701, A1577541, A1578111, A1578131,
A1578151, A1578203, A1578173, A157711,
A157712, A157594, A1577110, A15782030,
A157121, A157123, A157124, A157127,
A157130, A1578171, A1578181, A1578201

Table of Contents

Questions and Answers

  • A
    Amy CarterAug 9, 2025
    What to do if my North Star A1573701 has low or surging pressure?
    • M
      Michael LeeAug 9, 2025
      If your North Star Water Pump experiences low or surging pressure, or no water flow, several factors could be at play. First, ensure there is an adequate water supply, referring to the water supply section of this manual. A plugged pump inlet filter can also cause this issue; consult the maintenance section of this manual for guidance. Verify that you're using the correct high-pressure nozzle. If the nozzle is plugged, remove it and check for blockages. A worn nozzle should be replaced. Finally, inspect the pressure hose for leaks and replace it if necessary.
  • J
    Jacob RiggsAug 25, 2025
    Why is there no chemical injection in my North Star A1573701 Water Pump?
    • M
      Mary RichAug 26, 2025
      If your North Star Water Pump isn't injecting chemicals, make sure you're using the correct chemical nozzle. Back pressure from an extra-long discharge hose could also be the problem; try using a shorter hose. Inspect the chemical siphon hose for leaks, replacing it and using hose clamps if needed. Finally, ensure the chemical strainer is completely submerged in the chemical solution.

North Star A1573701 Specifications

General IconGeneral
BrandNorth Star
ModelA1573701
CategoryWater Pump
LanguageEnglish

Related product manuals