North Star M106470D.2 - User Manual

Owner’s Manual
Original Instructions for
Assembly, Testing, Operation, Servicing, and Storage
Water Pump: Outdoor agricultural product used for general
purpose water pumping and field irrigation.**
WARNING
READ and UNDERSTAND the Owner’s Manual completely before using this water pump. Assemble, test, and
use only in accordance with the Owner’s Manual instructions.
WEAR personal protective gear when filling, using, cleaning, and servicing the water pump.
DO NOT START water pump until ready to use in order to avoid unintentional spray release.
Improper use of the water pump could result in serious injury or illness to the operator or nearby
persons/animals, or could cause damage to the environment.
** This water pump is recommended for use in pumping/spraying non-flammable liquids such as
water. Solids capacity will depend on model.
Any Questions, Comments, Problems, or Parts Orders
Call NorthStar Product Support 1-800-270-0810
ITEM NUMBER: 106470, 106471
SERIAL NUMBER: _______________
M106470D.2

Summary

About Your Water Pump

Summary of Important Safety Information

Warning Label Location

Unpacking

Assembly

Machine Components

Operation - Preparing the Water Pump for Each Use

Step One: Inspect;Repair

Inspect and prepare the water pump for use, ensuring it is in good working order.

Step Two: Fueling

Instructions on safely adding fuel to the water pump's engine.

Step Three: Attach a suction strainer

Guidance on attaching a suction strainer to the water pump's suction hose.

Step Four: Place the water pump

Instructions for positioning the water pump near the liquid source for optimal suction.

Operation - Using the Water Pump

Storage

Troubleshooting

Specifications

106470;106471 Exploded View

782592 Pump Exploded View

782593 Pump Exploded View

Limited Warranty

North Star M106470D.2 Specifications

General

Brand	North Star
Model	M106470D.2
Category	Water Pump
Language	English