Operation - Using the Sprayer (continued)
28
Retaining nut
Spray nozzle
6. Squeeze trigger &
adjust nozzle
To spray, squeeze the gun trigger.
- Twist the spray nozzle to adjust from a straight stream to hollow cone
spray pattern, as recommended on the chemical label for proper delivery
rate.
Note: It is not unusual for the operator to be exposed to chemical drips
while adjusting the nozzle – gloves should be chemical resistant.
7. Operate broadcast
boom
A. O pen boom valves
Open the left, right, or both boom valves as desired.
B. Unfold one or both boom arms as required
O
en desire
boom valves
To Next Page
