IMPORTANT:
Use fresh water to wash any sand or dirt from the window before packing up. Take
care if using a cloth to wipe the window as any residual grit could scratch the surface.
IMPORTANT:
Allow the canopy and leash to dry completely before packing the wing into its bag.
Never store your wing wet or moist in your bag for an extended period. This can cause colour
migration, which will render the warranty void.
1.
Open the Pinch Clamps by pushing the end tab outwards.
2.
Unscrew the HyperFlow Inflation Valve anticlockwise to deflate the LE and Strut.
3.
Fold the dry wing in half, wing tip to wing tip.
4.
Roll both tips together back towards the Strut.
5.
Place your hand on the trailing edge side of the LiteVision Window Panels. Fold the lower
part of the rolled wing up toward the LE. Do NOT fold windows.
6.
Store in your North Wing Bag.
To Next Page
Loading...
