Northern IP4BIR100 - Installation of the Bullet Camera

IP4BIR100 IP Bullet Camera · Quick Start Guide
12
12
Installation of the Bullet Camera 2.2
Both wall mounting and ceiling mounting are suitable for the bullet
camera. Wall mounting will be taken as an example in this section.
You can take steps of wall mounting as a reference if ceiling
mounting is adopted.
Steps:
1. Drill the screw holes in the wall using the provided drill template.
Ceiling Mounting
Hole
Hole
Hole
Drill Template Figure 2-3
2. Route the corresponding cables.
3. Secure the camera to the wall with the supplied Screws.