EasyManua.ls Logo

NorthFlo PSNF65VS - Page 4

Default Icon
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1
Thank you for trusting a NorthFlo Variable Speed Heat Pump for your pool! Please read
this instruction manual carefully and operate strictly according to the user manual before
starting the heat pump, otherwise the heat pump may be damaged or cause you
unnecessary harm.
Special Attention:
A. This product is only for swimming pool water heating applications and can’t be used for
the heating for any other liquid materials.
B. The inlet and outlet water nozzles can’t bear the weight of external pipes.
C. The main power switch should be out of the reach of children.
D. Make sure the power is switched off before opening the case.
NOTE:
A. The swimming pool heat pump must be installed by a qualified electrician.
B. To maximize your swimming comfort, set proper heating temperature.
C. Don’t put obstacles near the air inlet and outlet of the heat pump.
D. This heat pump has power-off memory function.
E. When the ambient temperature is below 0 degree, make sure to switch off the main
power, and drain off the water from heat exchanger.
F. Never place your hand or any other object in the air inlet or outlet of the heat pump.
G. If any abnormal circumstances discovered, ex: abnormal noise, smells, smokes and
leakage of electricity, switch the main power off immediately and contact your local
dealer/installer. Do not try to repair the heat pump yourself.

Related product manuals