VERS. 2017.06.29 TR 202_MAN_EN
4
TR 202
OPERATING INSTRUCTIONS
1 BASIC SAFETY INSTRUCTIONS 5
1.1 Symbols 5
1.2 Machine plate 6
1.3 Safety instructions for particular operating phases 6
2 MACHINE DESCRIPTION 8
2.1 Short description 8
2.2 Purpose of use 8
2.3 Layout 8
2.4 Technical Data 10
2.5 Statement regarding the vibration emission 11
2.6 Statement regarding noise emission 12
3 ASSEMBLY AND COMMISSIONING 13
3.1 Assembly of the legs 13
3.2 Assembly of the handles 13
3.3 Cutting head 13
3.4 Assembly of the cooling system 14
3.5 Transport wheels 14
3.6 Tool assembly 15
3.7 Electrical connections 16
3.8 Assembly of the guide of cut 16
3.9 Water cooling system 16
3.10 Starting the machine 17
4 TRANSPORT AND STORING 18
4.1 Securing for transport 18
4.2 Storing of the machine 18
5 OPERATING THE MACHINE 19
5.1 Site of work 19
5.2 Cutting 19
5.3 General advice for the cutting 19
6 MAINTENANCE AND SERVICING 20
7 FAULTS: CAUSES AND CURES 21
7.1 Fault-finding procedures 21
7.2 Trouble-shooting guide 21
7.3 Circuit diagram 22
7.4 Customer service 23
To Next Page
Loading...
