Nortrac 40XTD - Grounding; Safety and Product Labels

Page 10 / 48
Grounding
⚠WARNING
 The coolant heater must be grounded while in use to protect the operator from electrical shock. The
plug MUST be plugged into a matching receptacle that is properly installed and grounded in
accordance with ALL local codes and ordinances.
 DO NOT MODIFY THE PROVIDED PLUG. If it will not fit the receptacle, have the proper receptacle
installed by a qualified electrician.
 CHECK with a qualified electrician or service person if you do not completely understand the grounding
instructions, or if you are not sure the tool is properly grounded.
Grounded Tools: Tools with 3-Prong Plugs
The coolant is equipped with a heater which has a 3-prong plug. This needs to be grounded when plugged in to
a 110-volt wall socket.
Safety and Product Labels
Ref.#
Description
Quantity
1
NorTrac Decal
2
2
Vehicle Reversing Warning Decal
1
3
Crush Hazard (Hand) Warning Decal
2
4
Crush Hazard (Body) Warning Decal
2
5
Fall Hazard Warning Decal
2
6
Entanglement Hazard Danger Decal
1
7
#1 Track Maintenance Warning Decal
2
8
Burn Hazard Warning Decal
1
9
#1 High-Pressure Fluid Hazard Warning Decal
2
10
Rotating Blade Hazard Warning Decal
1
11
Explosion Hazard Warning Decal
1