• Always wear the proper protective equipment including ANSI Z87.1 compliant eye protection, hearing
protection, steel toed boots, heavy-duty work gloves, and hard hat.
• Follow all start up procedures before each use.
• Before startup, check all fluids including engine oil, hydraulic oil, and coolant.
• Before each use, inspect track tension and adjust if needed.
• Keep all bystanders at least 20 feet away from work area.
• To avoid property damage, remove backhoe if not in use while operating machine.
Precautions Before Run-in
1. Clean the area around the dozer.
2. Check and retighten all outer connections, such as bolts and nuts.
3. Check and fill the lubricant, water, fuel, and hydraulic oil to sufficient levels.
To Next Page
Loading...
