Nottingham Arm Boards
Following you will find a grid for specifying and ordering mounting systems for the
most commonly requested tonearms for each of the Nottingham Analogue turntables. All
information is based on the assumption that the turntable in question is a current model
and is equipped with the standard mount for a Nottingham tonearm. ALL exceptions
must be noted. Be aware that older Space Decks and Hyperspace Decks have thinner
platters which require a different set up.
Please be advised that the following information is accurate only for standard length arms
that are currently in production. ALL tonearms not listed must be quoted individually.
ALL 12 inch versions of these arms are exempt and must be quoted individually.
When ordering you MUST specify the model number of the specific tonearm and
whether you intend to mount it on the right or left hand side of the table. All left hand
mounts will require complete pods for Space Decks and Hyperspace Decks unless you
are replacing an arm currently on a left hand POD.
To Next Page
Loading...
