EasyManua.ls Logo

NOTTINGHAM ANALOGUE STUDIO Space Deck - What about the Plinth

Default Icon
26 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
What about the plinth
A plinth is supplied with each table. In the case of the Space Deck and the
Horizon this is done to supply a platform with a predictable behavior. It is possible to use
the tables without the plinth, but be careful! As we mentioned in the section above, many
things that claim to do a “better” job, don’t. So listen.
The Dais requires the use of the plinth. There is a cutout for the motor that allows
the motor to sit on the shelf below the plinth. This provides further isolation between the
motor and the turntable. If you leave out the plinth, you will not be able to get proper
height for the motor or proper isolation.
The other thing to keep in mind is that if you get way too much oil in the bearing
it may overflow and drip onto your furniture. (Yeh, yeh, we all get the joke about British
machinery leaking oil. Why do you never drive a British car without an oil spot under it?
Because it must be out of oil.)

Related product manuals