EasyManua.ls Logo

NOTTINGHAM ANALOGUE STUDIO Space Deck - Maintenance and Service; Bearing Oil Change Procedure; Platter Wobble Correction

Default Icon
26 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Maintenance & Service
Cleaning Belts
The belt should last a very long time. Occasionally you may want to clean it
(especially if you have smokers in the house or if the house is dusty). All you have to do
is wash it in some gentle liquid hand soap, rinse it carefully and let it dry.
Changing Oil
Tom Fletcher says: “Oil wears out under rotation – if the turntable is used very
frequently, then change the oil every six months. If it is used once or twice a week (how
most turntables are used) oil change is required only every 18 months to two years.”
You may also want to change oil if you haven’t tried the new Special
Nottingham Analogue Kinetic Enhancement oil. Believe it or not, this oil will
improve the performance of your turntable. It has improved the performance of every
turntable on which we have tried it.
Leveling the platter
Rarely, you may run across a platter that seems to wobble ever so slightly as it
turns. On the Space Deck and the Horizon turntables the platter is held in place by three
screws that are found under the mat and right around the spindle. You can correct these
minor wobbles by tightening or loosening the three screws. Adjust to level the platter but
be careful not to over-tighten. If you do not feel comfortable attempting this operation,
contact Audiophile Systems.

Related product manuals