Why is the suction pump on my Nouvag Vacuson 60 Medical Equipment not functioning?
- DDavid CrossAug 2, 2025
If the suction pump on your Nouvag Medical Equipment isn't working, consider these potential causes: 1. Ensure the vacuum pump is switched on by connecting the On/Off-AIR-Pedal at the rear of the device. 2. Check all seals and tubes to make sure the vacuum system is airtight and that the jar lid is properly closed. 3. Ensure the air inlet port at the rear of the device is closed with its cap. 4. Verify that all tubes are connected correctly. 5. If the jar is full, replace it with a fresh, empty one, as the overflow protection may have locked down. 6. Ensure you have read the instruction manual carefully.