6. APP
Menu-> Network Application
7. USB
USB Menu
Menu->USB Menu or press the USB button directly to enter the USB menu. if
hard-disk is to be used with the receiver, please make sure it is inserted before
booting up.
USB Manager
Menu-> Expansion->USB Manager
8. WIFI
Plug in the wireless USB dongle to the USB port.
1. Select the network name of your Wi-Fi access point from the list. And you
can press RED button to refresh the list.
2. Press the OK button, then input the right password. And you can press
YELLOW button to disable/enable the WI-FI.
To Next Page
Loading...